Commercial Trash Liners for Janitorial and Cleaning Companies

Commercial can liners are the bags that line trash and recycling containers in offices, schools, restrooms, kitchens, and jobsites. Tribune Supply supplies high-density and low-density liners in standard sizes for janitorial companies, facilities teams, and public agencies. Pricing is by custom quote based on size, strength, and case quantity.

How to Choose the Right Can Liner

The right liner fits the can without slipping or overstretching and holds the load without tearing. Buying too heavy wastes money. Buying too light creates leaks, double-bagging, and callbacks.

Match the resin to the waste. High-density polyethylene (HDPE) liners are thin, strong for their weight, and slightly crinkly. They suit paper, office waste, and restroom towels. Low-density and linear low-density polyethylene (LDPE and LLDPE) liners stretch before they tear, so they handle sharp, heavy, or irregular waste such as kitchen scraps, glass, jobsite debris, and wet waste.

Understand thickness. HDPE thickness is measured in microns (mic), typically about 6 to 24 mic. LLDPE thickness is measured in mils, typically about 0.5 to 3 mil. A thinner HDPE liner can carry as much as a thicker LLDPE liner, so do not compare the two numbers directly. Compare by intended load instead.

Size by the can, not the gallon label. Measure the can. Liner width should be about half the can's circumference plus an inch or two. Liner length should equal the can's height plus half its diameter plus 3 to 4 inches of overhang. Gallon ratings are a starting point, since cans of the same capacity vary in shape.

Pick the seal. Star-seal bottoms fold into the can and spread weight evenly, which reduces leaks. Gusseted and flat-seal bottoms are common on larger liners and outdoor containers.

Choose a color with a purpose. Clear liners make contents visible, which helps with recycling programs and security screening. Black liners hide contents. Colored liners can separate waste streams. Regulated medical waste requires compliant bags, so tell us if you need those.

Check packaging. Coreless rolls dispense one at a time and reduce waste on carts. Flat packs suit stocking closets. Case counts commonly run from 200 to 500 liners or more, depending on size.

Common Liner Sizes and Uses

Liner size (in.)
Typical can capacity
Common use
24 x 24

7 to 10 gal

Office and desk-side cans

24 x 33

12 to 16 gal

Restrooms, small offices

30 x 37

20 to 30 gal

Breakrooms, classrooms

33 x 40

33 gal

Common areas, kitchens

40 x 46

40 to 45 gal

Large indoor containers

38 x 58

55 to 60 gal

large round container, outdoor, jobsites

Products We Quote

Product
Typical specs
High-density can liners

6 to 24 mic, coreless roll, clear or black

Low-density can liners

0.5 to 1.5 mil, flat pack or roll, clear or black

Heavy-duty liners

1.5 to 2 mil LLDPE for wet, sharp, or heavy waste

Contractor bags

About 3 mil for construction and demolition debris

Recycling liners

Clear or blue for recycling programs

Recycled-content liners

Post-consumer content for sustainability programs

HDPE vs. LLDPE at a Glance

High-density (HDPE)
Linear low-density (LLDPE)
Feel

Thin, crinkly

Soft, stretchy

Measured in

Microns

Mills

Best for

Paper, office, restroom waste

Sharp, heavy, wet, or bulky waste

Weakness

Tears easily once punctured

Costs more per liner at equal strength

Who This Is For

  1. Janitorial companies stocking carts across many buildings
  2. Commercial cleaners serving restaurants and food service
  3. Facilities teams, schools, and municipal buildings
  4. Contractors who need heavy-duty bags for jobsite debris

Frequently Asked Questions

What size liner fits a 32-gallon can?

Most 32-gallon round cans take a 33 x 40 inch liner. Measure your can's circumference and height to confirm, since shapes vary.

Is a higher mil number always stronger?

Not across resin types. A thin HDPE liner can carry a similar load to a thicker LLDPE liner. Choose by the type of waste, then compare thickness within the same resin.

Why do my liners keep tearing?

The resin may not suit the waste, the liner may be too small and overstretched, or the can may have sharp edges. Tell us the waste type and can size and we will suggest a better fit.

Do you have recycled-content liners?

Yes. We can quote liners with recycled content. Tell us if your program requires a specific percentage.

Related Categories

Tell us your can sizes and waste types. We will quote the right liners.

Download The Facility Supply Buyer's Guide: build lists, set pars & compare quotes today. Click to learn more