Jobsite consumables are the fasteners, cutting accessories, abrasives, tapes, sealants, sheeting, and cleanup supplies crews use up on every project. Tribune Supply supplies them, along with hand tools and jobsite gear, to general contractors, trades, and facilities maintenance teams. Pricing is by custom quote based on your list and quantities.

Consumables are small items with a big effect on productivity. A missing box of anchors or a dull blade costs more in lost time than the item itself.
Separate project materials from truck stock. Project items (specific anchors, sealants for a spec, sheeting for a phase) tie to one job and delivery date. Truck and shop stock (common fasteners, blades, bits, tape, gloves) restocks on a cycle. Quote and track them separately.
Specify fasteners completely. Include type, diameter, length, head style, drive, material, and coating. For exterior work and treated lumber, corrosion resistance matters, so specify hot-dip galvanized or stainless where required. For anchors, include base material (concrete, block, drywall) and load requirements.
Match blades and bits to the material. Wood, metal, masonry, and tile each need different blades and bits. Note the tool's arbor or shank size and the blade diameter and tooth count.
Choose abrasives by grit and backing. Lower grits remove material fast. Higher grits finish. Match sanding discs to the sander's hook-and-loop pattern and hole count.
Pick sealants for the joint. Silicone suits wet areas and nonporous surfaces. Acrylic latex caulk is paintable for interior trim. Polyurethane sealants handle exterior joints with movement. Fire-rated sealants are required for penetrations in fire-rated assemblies, so check the listed system for the job.
Plan dust control and cleanup. Poly sheeting (commonly 4 or 6 mil), zip-wall supplies, floor protection, and contractor bags keep sites clean and clients happy. Order them with the materials, not after.
Size extension cords to the load. Heavier-gauge cords (lower AWG numbers such as 12 AWG) carry more current over longer runs than 14 or 16 AWG. Use cords rated for outdoor or jobsite use.
Product | Typical specs |
|---|---|
Screws, nails, and bolts | By type, size, material, and coating |
Concrete and drywall anchors | Circular, reciprocating, and oscillating, by material |
Drill bits and driver bits | Twist, masonry, spade, hole saws |
Abrasives | Sanding discs, sheets, flap discs, cutoff wheels |
Tape | Duct, painter's, masking, foil, marking |
Caulks, sealants, and adhesives | Silicone, acrylic, polyurethane, construction adhesive |
Poly sheeting and floor protection | 4 and 6 mil sheeting, protective floor film and board |
Contractor bags | About 3 mil, heavy-duty |
Marking supplies | Marking paint, chalk, lumber crayons |
Extension cords and jobsite lighting 12 to 14 AWG cords, LED work lights
Hand tools Utility knives, tape measures, levels, pry bars
Silicon | Acrylic latex | Polyurethane | |
|---|---|---|---|
Paintable | Usually no | Yes | Yes, after cure |
Flexibility | High | Low to moderate | High |
Best for | Wet areas, glass, tile | Interior trim and drywall | Exterior joints, concrete |
Cleanup | Solvent | Water | Solvent |
Yes. Send the list and how often you restock, and we will quote recurring delivery.
Type, diameter, length, head and drive style, material, coating, and quantity. Note the application if corrosion resistance matters.
Make your request in the inquiry, and we will confirm.
Silicone is common for wet areas such as tubs and showers because it stays flexible and resists water. Use a product labeled for kitchen and bath.
Do you supply contractor bags and cleanup supplies?
Yes. We quote contractor bags, poly sheeting, floor protection, and cleanup supplies alongside your materials.
Download The Facility Supply Buyer's Guide: build lists, set pars & compare quotes today. Click to learn more